How to Fold a Paper Airplane

Summary

In this article, we will learn how to fold a paper airplane. The speaker recommends folding the plane as late as possible and emphasizes the importance of controlling the layers and making sharp folds. They also discuss setting the dihedral angle using a gauge.

Table of Contents

• Folding the Paper Airplane: The speaker recommends folding the paper in half and aligning the corners carefully. They caution against letting the layers drift and recommend using thumbs to hold them in place. They suggest leaving space at the nose and using tape to wrap around it.
• Setting the Dihedral Angle: The speaker recommends using a 165 degree angle measurement at the nose and a 155 degree angle measurement in the middle of the wing.

Folding the Paper Airplane

To fold a paper airplane, start by folding the paper in half and aligning the corners carefully. Make sure to control the layers and use your thumbs to hold them in place. Avoid letting the layers drift and make sharp folds. Leave some space at the nose and use tape to wrap around it. This will help to keep the nose of the plane from collapsing.

Setting the Dihedral Angle

To set the dihedral angle, use a gauge. The speaker recommends using a 165 degree angle measurement at the nose and a 155 degree angle measurement in the middle of the wing. This will help to create stability in the airplane and make it easier to fly.

How to Tape Up a Model Plane’s Wings

Summary

In this article, we will learn how to tape up a model plane’s wings. The speaker emphasizes the importance of measuring accurately and cutting the tape to the right size. They also demonstrate how to split the tape in half and wrap it around a seam.

Table of Contents

• Measuring and Cutting the Tape: The speaker emphasizes the importance of measuring accurately and cutting the tape to the right size.
• Covering the Seams: The first piece of tape is applied to cover a seam, with the speaker demonstrating how to split the tape in half and wrap it around the seam. They then apply two more pieces of tape to cover another seam and around the nose of the plane.
• Creating a Seam on the Middle of the Wing: The next step is to put a seam in the middle of the wing.

Measuring and Cutting the Tape

To tape up a model plane’s wings, it is important to measure accurately and cut the tape to the right size. This will ensure that the tape covers the seams properly and does not add unnecessary weight to the plane.

Covering the Seams

The first piece of tape should be applied to cover a seam. The speaker demonstrates how to split the tape in half and wrap it around the seam. They then apply two more pieces of tape to cover another seam and around the nose of the plane. This will help to keep the plane together and prevent it from falling apart in flight.

Creating a Seam on the Middle of the Wing

The next step is to put a seam in the middle of the wing. This will help to create stability in the plane and make it easier to fly.

How to Create a Seam on a Model Airplane’s Tail

Summary

In this article, we will learn how to create a seam on a model airplane’s tail using tape. The speaker demonstrates how to use a one millimeter strip of tape to create a solid piece on the tail.

Table of Contents

• Using a One Millimeter Strip of Tape: The speaker demonstrates how to use a one millimeter strip of tape to create a seam on a model airplane’s tail.
• Positioning the Tape: They cut a strip of tape in half and position one half on top of the seam on the wing.
• Wrapping the Tape: They then use the other half to wrap around the seam on the tail, folding the tape so that it adheres to both sides of the seam. This is a difficult move but creates a solid piece on the tail. The speaker repeats this process with another strip of tape to further secure the tail.

Using a One Millimeter Strip of Tape

To create a seam on a model airplane’s tail, the speaker demonstrates how to use a one millimeter strip of tape. This will help to create a solid piece on the tail and prevent it from falling apart in flight.

Positioning the Tape

After cutting a strip of tape in half, position one half on top of the seam on the wing. This will help to ensure that the tape adheres properly and creates a strong bond.

Wrapping the Tape

Next, use the other half of the tape to wrap around the seam on the tail, folding the tape so that it adheres to both sides of the seam. This is a difficult move but creates a solid piece on the tail. The speaker repeats this process with another strip of tape to further secure the tail.

Conclusion

In this article, we learned how to fold a paper airplane, tape up a model plane’s wings, and create a seam on a model airplane’s tail using tape. By following these instructions, we can create sturdy and stable model airplanes that are fun to fly.